Fire Fighting Vertical Escape Chute / Buildings Emergency Escape
Slide
Vertical Escape Chute Advantages
The escape chute consists of three layers: outer fire prevention,
middle layer insulation, smoke isolation and inner layer guide
slip. Each layer had high tensile strength of the pipe, the middle
layer position with a special rubber ring, rubber ring with
elasticity, make the human body produce certain resistance after
buffer, so the rubber makes people slow down speed of about 1.5-4
meters per second to safety down to the ground. The escape chute
has four supporting bands, which can prevent the wind from being
blown and turned by the wind at the fire scene; it is used to
protect the safety of the escaping; it is suggested to escape one
person every 3 seconds and escape continuously. The escape chute
can be designed according to the height of the building. It is
suitable for any place and any building in the height of 60 meters.
If it is more than 60 meters, it can be installed at any height.
Convenient installation and operation of escape chute. Do not limit
the number of users, theelderly and infirm can be used; the
external escape slide made of fire retardant materials, fire escape
can delay the flames invasion; escape escape can not see the ground
scenery, no fear; small area, do not use electric power, operating
cylinder and high safety. The escape chute is usually placed in the
stainless steel airtight box, which is waterproof, insect proof and
pollution resistant. It can be stored for a long time and easy to
maintain. Can be equipped in high-rise buildings, fire ladders,
fire trainingtowers, oil drilling platform, airport control tower,
high-speed rail(EMU), hospitals, schools, office buildings and so
on.
Vertical Escape Chute parameters
| Name: | Vertical Escape Chute | Entrance Circle Size: | P600mm |
|---|
| Distance From Landmar: | H800mm | Standard Weight: | 35-80kg |
|---|
| Number Of Passengers In Emergency: | 22 Person/L 20m Slide Gauge | Design Glide Speed: | ≤3.5m/s(Self Controllable) |
|---|
| Fire Proof Jacket High Temperature Resistance: | 600c | Experimental Tension: | 2.2t |
|---|
| Allowable Tension: | 1.5t | Application: | Firefighting |
|---|
Escape chute type:
escape chute is the door to escape the lives of the victims in the
fire. Because opportunities are reserved for people who are
prepared. In the event of fire, there is an escape chute, and the
people in the building can escape from the scenein the first place.
According to the different building or the use of different places,
choose different types of suitable escape chute set with the
following four kinds. High rise building window escape chute
High rise building window escape chute
Outdoor type: It is usually a stainless steel storage bracket
combination box placed in the house near the window. When it is
used urgently, first open the stainless steel storage box and lift
the slide frame out of the window, then put the escape chute (cloth
bag) outlet into the room. The slide frame frame hole relies on the
slide down force, and the slide slide to the ground can complete
the evacuation of the person.
Indoor series type escape slide
Corridor, platform type escape chute: first make the house corridor
and balcony make a 75*75 cm square hole, each floor is fitted with
the floor height matching escape chute. When emergency occurs, as
long as the operating mechanism is pulled, stored in the stainless
steel storage tank in each floor of the escape chute will
automatically droop to each lower floor. Evacuate the affected
people quickly and safely from dangerous areas.
Spiral escape chute
- Indoor, outdoor, common, and mobile devices are available for
selection. No space is used to affect the original space.
- Any floor in any location can be installed within the ccc range.
- Convenient operation and rapid escape of 22 people per minute, the
weight of 35-125Kg old and weak women and children can be used.
- When using the escape slide, you will not see the scene above the
ground without fear.
- Escape chute, the outer layer is made of flame retardant material
forever, and it can delay the invasion of fire tongue when it
escapes.
- The escape chute has high safety and can withstand more than
2000Kg.
- The outer layer is affixed with luminous precautions and operating
instructions, and can be used clearly in the dark.
- The escape chute is designed according to the principle of physical
gravity, and does not need to use electricity to rely on its own
gravity.
- The escape slide adopts vertical type without occupying space, and
does not need a wide square.
Shared escape chute
The construction of a vertical outdoor smoke rush shaped channel
from the ground layer to the height of each floor, are connected in
series to form a closed fire pipe structure, each floor has a fixed
point and an escape pipe entrance box, closed at twenty-four hours
on the escape slide, and then put it directly without once there is
a fire or emergency evacuation, save time.
